Customer Service Hotline:
+8613261677119
+8613261677119
What makes these programmes hard is rarely the equipment, and almost always the sequencing around people living there. A single staircase serves six floors, a roof structure nobody documented and a shopunit below. A programme on Tai Chung Kiu Road, in Sha Tin, Hong Kong, needs equipment that can be fitted in occupation, commissioned phase by phase and evidenced with documents somebody else signs. That is what this page is written for: overseas distributors, regional contractors and sourcing teams looking for a China manufacturer that supplies into Hong Kong retrofit programmes rather than a catalogue that stops at the port.
TL;DR: Two stage behaviour is a configuration decision documented against the written evacuation plan, with sensing elements referenced to EN 54-7, heat points to EN 54-5 and the radio parts to EN 54-25. No certificate converts a delay into compliance; the plan and its authority acceptance decide that. Everything below is written from the standpoint of the factory, including what we do not do, because a supply programme that survives an authority check is worth more than one that survives a sales call.
Wanlin Fire supplies into these programmes as the manufacturer, not as the local contractor. The statutory signing sits with the registered fire service installation contractor appointed for the building, the transmission service sits with whichever provider holds the link, and we write that split into every quotation so nobody discovers it at handover. Sourcing terms, minimum quantities and local code submittal support with per-configuration technical files, radio compliance evidence for the destination and national registration support for the importer of record are stated per programme rather than assumed.
A management office called because the previous scheme had quietly stopped being maintained. The people involved were Peter Yeung, Compliance Manager, working alongside whichever contractor the owners appointed, and the constraint was access rather than technique. The building sits in New Territories, which decides nothing about the law and almost everything about the practical programme: trading hours, lift availability, how long you can stand on a landing with a ladder, and which neighbours speak to whom.
Before quoting we walked it. What settled it was not the specification, it was the sequence. First, the structural question nobody wanted to answer in writing. Second, whether the existing supply positions could carry the equipment without new builders work. Third, how many units could realistically grant access in the window available. Fourth, who was going to read the monthly report once the novelty wore off.
What changed: the common parts were completed and commissioned as a defined phase, the dwellings followed as appointments were granted, and the outstanding list stayed open as a written document rather than becoming a rumour. Factory direct pricing left the distributor around 36 percent to work with. Those figures are one building, not a benchmark, and we will not pretend otherwise.
Field case: A real fire on Tai Chung Kiu Road was investigated and cancelled because everyone assumed it was cooking. The point worth keeping is not that the equipment worked; it is that the failure had a name, a location and a date on it, which is what let it be dealt with in one visit instead of three arguments.
The problems below are the ones that reach us most often. Detectors on Tai Chung Kiu Road had been removed so often that replacements were bought in bulk. What follows is drawn from retrofit work rather than from product literature, and it includes the parts suppliers generally leave out.
None of these are solved by a better detector. They are solved by sequencing, by writing things down, and by being honest about what a building can actually grant you in a given month. Where Hong Kong Two Stage Alarm False Alarm Reduction Package helps is narrower and more useful than most marketing admits: it removes the structural and spatial blocker from the programme, so the remaining problems are solvable by people rather than by concrete.
With immediate effect from 30 April 2026, the Fire Services Department published its acceptance of an Internet of Things fire detection system together with portable fire extinguishers as an alternative to the hose reel system and the manual fire alarm system for composite and domestic buildings of six storeys or below covered by the Fire Safety (Buildings) Ordinance, Cap. 572. The clause that everybody misreads is the scope: those two requirements are what get substituted. Sprinkler requirements, emergency lighting, automatic interruption devices for mechanical ventilation and every other applicable requirement stay exactly as they were.
The circular describes four qualifying conditions, and all four have to hold at once. The building falls under Cap. 572. A Fire Safety Direction has been issued for it. The building is a composite or domestic building of six storeys or below. Owners' consent covers detectors in the common parts and in each unit, transmission and alarm equipment in the common parts, and a suitable number of dry powder extinguishers on every floor.
| Item | Hose reel and manual alarm route | Detection and extinguisher route |
|---|---|---|
| Works duration | One to two years | Around two weeks |
| Works cost | Around HK$600,000 | Around HK$200,000 |
| Structural and spatial limits | A tank, a pump set and weight to carry | No such constraint stated |
| Fire detection | Manual | Automatic and manual |
| Maintenance oversight | Annual inspection | Real time monitoring plus annual inspection |
| Scope substituted | Not applicable | Two requirements only, the rest unchanged |
Every figure in that table is a comparison published in a department briefing, quoted here so a buyer knows what kind of order of magnitude the route was presented against. They are not our prices and not our programme durations. Real buildings are quoted individually, because structure, access and phase boundaries move those numbers in both directions.
The chain is short and worth understanding before anybody signs anything. A multi sensor detector inside a unit or in the common area sees smoke, carbon monoxide or both and sends a small message over localised radio to the gateway on that level. The gateway carries the manual call point and the alarm sounder, holds two SIM cards on two different mobile networks, and puts the message onto external mobile communication. The monitoring platform receives it, identifies the device and its recorded position, and both sends it onward through the Computerized Fire Alarm Transmission System to the Fire Services Communications Centre and duplicates the signal to the department server through an application programming interface. Frontline crews then use a mobile application at the scene.
Two of those hops are not hardware. The platform and the transmission link are services held by named organisations, and the published demarcation of responsibilities says plainly who does what: the registered fire service installation contractor installs, maintains, inspects and repairs the fire service installation components and issues the FS 251 certificate for them, while the transmission service provider provides and maintains the communication network that carries alarm signals onward. The service provider coordinating everything is expected to be a single point of contact, to submit site inspection and feasibility reports, and to report performance monthly.
Three parties read the same system and need different things from it: the property management office needs to know what to do at three in the morning, the owners corporation needs evidence it can table, and the maintenance contractor needs a list rather than a description. Writing all three into the handover pack costs one page and prevents most of what later goes to correspondence.
The published timing expectations run from sensor to platform display, and they are short. Fire and pre alarm arrive within ten seconds from mains powered equipment and twenty seconds from battery powered equipment. Fault arrives within twenty seconds regardless of supply. Status arrives within a hundred seconds regardless of supply. Heartbeat polling runs at thirty minutes for mains powered transmission equipment and twenty four hours for battery powered equipment.
Resilience is layered rather than single point, and it is worth knowing where the layers are. Dual SIM failover covers one mobile network failing. Redundant gateways cover one radio bridge failing. Dual power architecture covers supply failure at the gateway while long life cells carry the detector positions. Multi sensor fusion with two stage logic covers the false call that otherwise gets a detector removed. Each layer is dull on its own, and availability calculations quietly depend on all of them holding at once.
On maintenance, the obligation is explicit and frequently overlooked: defects identified in the fire service installation components are repaired within thirty days, failing which the matter is referred to the department by the contractor, and work is carried out strictly against approved drawings with completion records kept. None of that sits with the factory, and any supplier blurting that they handle it should be asked for the detail in writing.
Coverage fails quietly and it fails the same way nearly everywhere: the count came from a floor area before anybody walked the building. A reinforced slab is the single most effective thing these buildings do to stop a radio signal. A wet and salt laden party wall does something similar in pre war stock. Above a false ceiling shared by several lettings, the path is decided by what the grid itself is doing.
Where a block carries heritage status or appears on a graded list, expect separate approvals that have nothing to do with the equipment itself. The method that works is unglamorous. Tenants stay put through it, many of them elderly residents, and the retrofit usually runs alongside whatever renovation the block already has planned. Take what drawings exist, walk the building, place a gateway, measure, move it until the path is real, and record what was done. That record becomes the commissioning sheet, and it is what decides whether the coverage designed is still the coverage in place after the next tenant fit out. A decision that everyone expected to take a quarter landed in 28 days once the structural question was settled. Then a second question gets answered properly rather than hopefully: The committee sat on it for 28 days, then approved it without changes.
Below ground matters most and is skipped most often. A basement level often has no path up at all, so the answer is a gateway on the level rather than an antenna fight with the slab. Storage levels and back of house areas are the positions least likely to appear on any drawing somebody hands you. Rooftop plant enclosures, refuse rooms, switch rooms and meter cupboards are walked the same way, because a survey either covers the building or it does not. Antenna extension fixes one position with a known problem; it does not rescue a gateway sitting in the wrong place, and we price it per unit because that is how tenders ask for it.
Equipment replaces hose reels and manual alarm systems only where the authority accepts that route, and nothing else. A WANLIN-307 investigation stage only works when the person who can cancel it is named in writing. The WANLIN-307 sits at the centre of this configuration, and it is specified from the building rather than from the brochure. Whether wireless detectors are interconnected across units is a decision the appointed contractor records in the drawings, not something a supplier decides on site.
| Parameter | Specification |
|---|---|
| System reference | WANLIN-307 Hong Kong Two Stage Alarm False Alarm Reduction Package |
| Product category | Detection configured around two stage logic so cooking and steam produce an investigated pre alarm rather than a building evacuation |
| Radio network | LoRa from every head to the floor gateway with dual SIM backhaul, and both alarm stages transmitted with their own codes |
| Detection and trigger | Smoke and carbon monoxide channels evaluated together, with a single channel response opening the pre alarm stage rather than the evacuation |
| Supervision and health check | Both channels report drift and health, since a channel that has stopped responding quietly converts a real fire into a pre alarm nobody trusts |
| Protocol and integration | Web console showing which stage each device is reporting and exporting both to the platform and onward links |
| Notification path | Pre alarm reaches the responsible person without sounding the whole building, and fire alarm behaves per the evacuation plan |
| Alarm behaviour | Investigation delay and cancellation follow a written rule naming who may cancel and within what interval, with everything recorded |
| Power supply | Primary cells on heads and mains with standby at gateway positions, figures stated per model datasheet with conditions |
| Housing and mounting | IP rating per model datasheet with placement chosen against the actual cooking and ventilation arrangements |
| Installation pattern | Logic and delays agreed in writing at commissioning against the building evacuation plan rather than set anywhere convenient |
| Environmental rating | IP rating stated per model datasheet, with IP67 built on the gateway, alarm unit and call point positions where the configuration is specified for them |
| Frequency plan | Band and channel plan set for the operating region, stated on the order because the same hardware is not lawful at the same power everywhere |
| Coverage planning | Gateway count and placement taken from a radio survey rather than from the floor area, with the result recorded on the commissioning sheet |
| Maintenance and testing | Automatic self-check with fault, low battery and offline conditions reported separately, test interval set by the site operator and recorded on the drill record |
| Export documentation support | Technical file prepared to support submission by the registered contractor and the importer of record, including radio compliance evidence for the operating region |
| Certification documents | CE, RoHS and REACH documentation per applicable model, with EN 54-25 route papers on the wireless configurations and EN 54-7 or EN 54-5 papers on the detector heads, certificate number provided on request |
| OEM and ODM options | Logo, part number, packaging, manual languages including traditional Chinese where required, label artwork and platform identity string configurable |
| Full datasheet | Complete radio, electrical, battery and environmental data provided per model on request |
| Warranty | 60-month |
| Scenario | Model | Why it fits |
|---|---|---|
| Floor where the previous generation of alarms was taped over | WANLIN-307 | Two channels separate the burnt pan from the socket that is actually burning |
| Building with a ventilation shaft carrying cooking smell to every landing | WANLIN-340 | Heat heads in the affected positions take the corridor out of the argument |
| Management office paying repeated attendance charges for unwanted calls | WANLIN-860 | Investigation before mobilisation is recorded and defensible rather than improvised |
| Care premises where repeated evacuation carries its own risk | WANLIN-222 | Stage behaviour supports a plan built around progressive movement rather than a single rush |
Each statement is made per applicable model or configuration, and where a value is not ours to state, we say so instead of filling the gap with confidence.
What we can be held to, in writing, is the following. the first of them is honesty about the boundary, because every other claim gets cheaper once that is straight.
Local acceptance rests with the authority and is certified by the registered fire service installation contractor appointed for the building. We are the factory. We do not sign statutory submissions, we do not issue certificates in place of that contractor, and we tell clients the same thing before the first order rather than after the first question. What we do supply is the technical file the submission depends on: per model documentation, radio compliance evidence for the operating region, the frequency plan stated on the order, and a written statement of which documents cover which parts of the scheme.
The documents named in submittals for these programmes depend on the configuration ordered, and the honest answer is always the same: the reference list belongs on the quotation rather than in a paragraph. What we issue is stated per applicable model, per ordered configuration and per the components actually fitted, and we write which parts of a scheme each document covers.
We suggest any certificate number issued to us be checked with the issuing body directly. We say that because we would rather lose a quotation to a careful buyer than win one against a buyer who later discovers the number was read off a photocopy.
| Reason | What it means on a live site |
|---|---|
| Factory direct supply | Labels, part numbers, manual languages and firmware identity strings are set at the plant rather than added afterwards |
| Per model evidence | Battery, sensing and environmental figures arrive with their conditions attached |
| One radio plan per order | Spares from one batch stay interchangeable years later |
| Honest scope statements | The boundary between installer, platform operator and transmission provider is written, not implied |
| Phased delivery | Common parts and dwellings are two commissionable phases with separate records |
Around 9 district level retrofit enquiries have come through our export desk in the last twelve months across Sha Tin, Hong Kong and neighbouring districts, which is a small number and a real one. Roughly 43% of those buyers came back for a second building, and that repeat rate tells you more about the handover than any specification does.
Five steps, in the order they actually happen. the sequence below is the one that actually happens, including the two steps everybody tries to skip.
First comes the document trinity: drawings, access reality and the Fire Safety Direction itself, read before a single device is discussed. Second is the radio survey, which produces gateway counts in writing. Third is quotation against that survey, with phase boundaries drawn so completion can be defined. Fourth is production with configuration locked. Fifth is fitting inside agreed access windows. Sixth is commissioning, certification by the appointed contractor, and handover of the register, readings, drill procedure and maintenance terms.
We are recruiting local partners and export trade counterparts for these programmes, and we would rather start with one building and be judged on the second.
Three people who worked this programme, quoted without tidying up.
The fitting went floor by floor and our tenants complained less than they do about the lift maintenance.
- Felix Yuen, Procurement Manager, Ngau Tau Kok Road, Kwun Tong, Hong Kong
The registered contractor we appointed had everything except a reason to trust the file. The per model documents changed that conversation.
- Michael Tang, Project Manager, Aberdeen Main Road, Southern District, Hong Kong
What I needed was a number for the gateway count in writing. That is what decided Tai Chung Kiu Road going ahead.
- Peter Yeung, Compliance Manager, Tai Chung Kiu Road, Sha Tin, Hong Kong
A: It means a stage that can be investigated before everybody leaves, with the intervals configured to the evacuation plan and agreed in writing. The honest trade is real: any delay stage delays full evacuation by its own interval, which is why the plan has to support it and why the responsible person has to be reachable. What it prevents is a permanently silenced system, which has a far worse response time than any configured interval.
A: A named person, within a stated interval, using a recorded action. Leaving this open is how a useful feature becomes a hazard, since anybody can quieten anything and nobody can afterwards say who did it. We recommend the rule be written into the handover pack with the names, and reviewed whenever the responsible person changes.
A: Sensitivity and thresholds are set per configuration and should be set deliberately rather than left whatever arrived from the factory. Corridors above cooking positions, rooms with poor ventilation and rooms with high dust load each want a slightly different answer, and the survey is where that gets decided while somebody can still look at the room.
A: Nothing physical, in honesty, but supervision changes the outcome. Removal and obstruction are reported as conditions, so a covered device becomes a line on a fault list within its own time limit instead of a permanently quiet device nobody notices. The deeper fix is placement: a head positioned so that cooking never triggers it is a head nobody is tempted to cover.
A: No, and anybody promising it should be asked to underwrite attendance charges. The pilot arrangements reported no false alarms over the evaluation period, which is a result worth quoting with its dates attached, not a guarantee transferable to every building with different cooking habits and different corridors.
Hong Kong Two Stage Alarm False Alarm Reduction Package is supplied from China into Sha Tin, Hong Kong Hong Kong smart building retrofit programmes as one defined scope: equipment, configuration, documentation and phase by phase commissioning support, with the statutory signing left to the registered fire service installation contractor appointed for the building. hong kong two stage alarm false alarm reduction package asks this question in every district, and the answer that keeps a programme moving is always the same two things: a survey taken in the real building, and responsibilities written down before fitting starts.
Lead times are stated per configuration, 28 days is the typical window quoted once configuration is locked, and 3 months of commissioning support is included as standard rather than sold as an extra. Evaluation samples are built on the production configuration rather than on a bench build, after sales support runs through named contacts, and export packing is specified per destination rather than improvised at the dock. Nothing here is a substitute for the local submission, and nothing here promises an authority decision.
Contact Wanlin Fire
Email: wanlinfirecontrol@163.com
Export hotline: +8613261677119
Website: https://www.wanlinfire.com
Factory: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
Last updated: September 28, 2026
Title of this article: Best Hong Kong Two Stage Alarm False Alarm Reduction Package Manufacturer | Tai Chung Kiu Road, Sha Tin, Hong Kong - Wanlin Fire